Labconco Xpert System 115V Led Montr 3950401

Labconco Xpert System 115V Led Montr 3950401 is one of the many quality laboratory and scientific products we have to offer at very competitive pricing. Labconco Xpert System 115V Led Montr 3950401 / 82018-124 is part of a wide selection of Labconco Laboratory enclosure accessories. Combining excellent quality with an affordable price, the Labconco Xpert System 115V Led Montr 3950401 / 82018-124 can meet your scientific research needs while still offering a good value for a budget conscious end user. If you have any questions about any of our Laboratory enclosure accessories please do not hesitate to contact our customer service for further guidance.

These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45dBA, depending on face velocity.

The deep interior easily accommodates large micro and analytical balances. The Clean-Sweep* airfoil allows air to sweep the work surface for maximum containment. The perforated rear baffle promotes horizontal laminar airflow to maximize containment. The upper containment sash foil bleeds air into the enclosure to direct concentrations of contaminants away from the operator’s breathing zone. The upper dilution air supply introduces room air at the top of the sash to dilute contaminants in the upper chamber and bathe the back of the sash with clean air. Additional side-entry airfoils allow air to sweep across the interior glass surfaces to enhance containment. The airfoil’s ergonomic design provides a comfortable position for the operator’s forearms.

Systems feature a true bag-in/bag-out filter disposal system for safely removing and replacing the HEPA filter. The HEPA filter cell is 99.99% efficient on particulates 0.3µm in size. An upper diffuser screen, located above the work area, provides protection for the HEPA filter. The system also features a front-mounted Minihelic* pressure gauge that monitors pressure differential across the HEPA filter to help determine filter loading. The built-in, positive pressure impeller is surrounded by a negative pressure plenum so that if a leak should develop, the unfiltered air is captured and refiltered. The blower also has vibration isolation supports to minimize disturbance to sensitive balances.

Sturdy glacier white and gray, dry powder epoxy-coated aluminum frame and steel rear plenum and baffle dissipate static charge. Tempered safety glass front sash, sides, and top offer excellent visibility, ambient light, and protection. Ergonomic angled sash allows a closer view, reduces glare, and provides a more comfortable operating position than vertical sashes. Hinged sash pivots upward and locks to a loading height of 48.7cm (19"). The 1.5m (5') and 1.8m (6') models incorporate a gas-assist lift and have a loading height of 70.4cm (27¹¹/₁₆"). The operating sash height is 23.9cm (9¹³/₃₂") on the 0.6m (2'), 0.9m (3'), and 1.2m (4') models. The 1.5m (5') and 1.8m (6') models have a 30.5cm (12") operating sash height. A wiping seal helps keep contaminants contained. Systems also include front-mounted light and blower switches, two utility ports, and glare-free fluorescent lighting.

Enclosures also feature an optional built-in airflow monitor. If the hood’s face velocity falls below the setpoint for more than six seconds, an audible alarm sounds and a red light glows. The alarm can be muted. On the Guardian* monitor, an LED glows green when the airflow is within setpoint range. The Guardian 1000 digital monitor features an LCD display of actual face velocity and an RS-232 port. Optional trace odor carbon filters can be easily installed atop the system to trap nuisance vapors from organic solvents, formaldehyde, ammonia, or amines. Stainless steel work surfaces feature a spill trough. The utility shelf kit has three epoxy-coated steel shelves that can hold a printer, utensils, and other miscellaneous supplies. Shelves attach to the rear baffle perforations of the enclosure.

All systems conform to modified ASHRAE 110-1995 standards, SEFA 1-2002 standards, and ANSI Z9.5-1-993 standards. The 115V systems are ETL and ETL-C listed; the 230V systems are CE marked.

Specifications for Labconco Xpert System 115V Led Montr 3950401:

(Please note that the description and stock photo may not correspond to the specific model listed above)

For a complete list of products offered by Labconco please visit our Labconco page. Don't forget to check out the extensive collection of Labconco Laboratory enclosure accessories and a wide array of Laboratory enclosure accessories from other quality brands. We offer FREE SHIPPING on most products over the value of $49.95. You may reach us by phone, email or live chat! We have a 100% Satisfaction Guarantee to ensure that every laboratory product you receive is exactly what you are looking for! Contact us TODAY! Filling out our RFQ is very simple and we are more than happy to have the opportunity to work with your procurement department to get the best quote for any particular product you have in mind.